Battery kill switch ideas

[colliderman]

I'd really like to install a battery kill switch in my Fly Deluxe as I'm finding it quite annoying and troublesome to constantly unplug my guitar.

I understand from a technical standpoint how the mod would work as it's quite simple, I'm just looking for some ideas from folks who've maybe done this before in a clever way that I haven't thought of. I don't really want to drill any holes so ideally it would make use of one of the holes already there, maybe by swapping a component to something that is dual purpose and includes a switch. Any ideas are welcomed and appreciated!

[Patzag]

Personally I don’t mind unplugging, but if I had to install such a switch, I’d want to just replace one of the pots with one that also functions as a switch. Turn down the tone pot and get a satisfying click at the end of the rotation indicating the battery is now disconnected.

[mmmguitar]

Though you've likely thought of it: One of my Flys has the 9v routed through a push-pull pot I leave in the "up" position when I'm not playing; so I can leave the guitar plugged in during the dozens of times in a typical noodling session I set it down to go be distracted by something in another part of my house. Compared to the backplate switches I've tried, I find my feeble mind often requires a more obvious visual/tactile cue on the face of the guitar, where my picking hand is more likely to find it in playing position: "Wait a minute: This knob is supposed to be down where the others are! Marc feel smart."

[colliderman]

Personally I don’t mind unplugging, but if I had to install such a switch, I’d want to just replace one of the pots with one that also functions as a switch. Turn down the tone pot and get a satisfying click at the end of the rotation indicating the battery is now disconnected.

I’m constantly picking my guitar up and putting it down during the day for work so having to unplug it each time gets tedious and half the time I forget. Been going through a lot of batteries!

I’ve considered a push pull but hadn’t really thought of a pot with a switch at the end of its travel. I do like that idea thanks!

[colliderman]

Though you've likely thought of it: One of my Flys has the 9v routed through a push-pull pot I leave in the "up" position when I'm not playing; so I can leave the guitar plugged in during the dozens of times in a typical noodling session I set it down to go be distracted by something in another part of my house. Compared to the backplate switches I've tried, I find my feeble mind often requires a more obvious visual/tactile cue on the face of the guitar, where my picking hand is more likely to find it in playing position: "Wait a minute: This knob is supposed to be down where the others are! Marc feel smart."

A push pull is definitely a good option and that’s a great point about having a visual cue whether it’s on or off. I wonder if the original push on knobs have enough grip on the pot shaft to not pop off each time I pull it.

A switch on the backplate is interesting and something I considered but wasn’t really sure what type of switch or how to mount it so that I wouldn’t accidentally switch it. You’ve actually seen this before though? I guess some sort of push button switch, or maybe a slider?

[mmmguitar]

You’ve actually seen this before though? I guess some sort of push button switch, or maybe a slider?

Yep. Anything SPST can be used to interrupt the battery-negative wire's path to the jack lug acting as an on/off switch when a 1/4" plug is inserted. My Belew uses a screw-mounted slider switch in the backplate, and I used one with my Supreme prior to deciding I preferred the push/pull. If you prefer the action of a pushbutton or rocker switch, it's only a matter of what you have room for.

[Augustonian]

Not sure what year you've got, but I've considered using the push button from the prerefined as a battery switch as I never really use my piezo and mag pickups at the same time.

Similarly, on my refined I use a push pot to do the work. I have some rubber knobs on it that definitely have enough friction for it to be a non issue.

[Soloaxer]

For the entry level Parkers with pick-up surrounds, I have seen some surrounds with a small slide switch incorporated into it. I can't remember where I saw them but I believe they should still be around. Also, D'Addario incorporates a kill switch on the end of a cord and yes they are pricey. I'm not sure if it would totally stop the battery drain? Any comments on that?

[mmmguitar]

For the entry level Parkers with pick-up surrounds, I have seen some surrounds with a small slide switch incorporated into it.

Perhaps it was a Seymour Duncan Triple Shot?

The Fly preamp powers on by connecting the battery negative/(-) wire to ground, via the "sleeve" portion of the inserted cable plug making contact with the internal portion of the jack that is connected to that battery wire. The cable design I think you're referring to affects only the plug "tip" signal path - Though it acts as a mute for the signal the guitar is outputting, the plug itself is still mechanically completing the battery power circuit inside the guitar and; therefore, will not act as anything more than a "power on" switch when inserted. The way to prevent the jack from completing the power-on circuit when a plug is inserted is to use a switch to isolate this grounding wire before it reaches the jack.