Does the Nitefly have the same truss rod design as the Fly?

[Reharm]

I just learned that the Fly has a truss rod made from music wire and was curious if the Nitefly has the same design or if it's a more conventional truss rod.

If anyone could let me know, I would appreciate it.

Thanks

[vjmanzo]

Hi @Reharm the NiteFly does have a traditional truss rod as opposed to the truss wire system in the original Fly. If you look at the 22nd fret of a NiteFly, you will see the truss rod nut.

[Reharm]

Thanks for the reply, @vjmanzo

I am aware of the nut at the end of the neck, I just wasn't aware if it was connected to an actual rod or a wire with a swaged end like the fly. Good to know. I'm a bit relieved.

[vjmanzo]

I'm a bit relieved.

#TrussRodHumor

[mmmguitar]

Thanks for the reply, @vjmanzo

I am aware of the nut at the end of the neck, I just wasn't aware if it was connected to an actual rod or a wire with a swaged end like the fly. Good to know. I'm a bit relieved.

I had the same question when I first found out about the Fly piano wire truss; and told myself that the spoke wheel nut was indicative of a standard double action rod due to the NiteFly representing a departure from the “fly weight” ideal; and therefore plausible. I’m glad someone else thought to ask and confirm something I had merely imagined to be the case.

[chrisandrews]

Does anyone know if the Nitefly truss rod is the same which was used on the Korean P38? Did they use the same threaded adjuster at base of heel?

[vjmanzo]

Does anyone know if the Nitefly truss rod is the same which was used on the Korean P38? Did they use the same threaded adjuster at base of heel?

Hi Chris—I’m not certain and I don’t own a P38, but, based on this image from a P38 eBay listing, it appears that way:

Hopefully someone who owns one and knows can also chime in.

[chrisandrews]

Wasn't sure due to the imperial/metric differences from a far eastern manufacturer but they certainly look the same.

On my parts list i only have listed Nitefly Capstan, none are listed under the P-Series section which makes me think it is the same or no-removable.

Hopefully someone may be able to take a measurement for me so I can compare

Does anyone know if the Nitefly truss rod is the same which was used on the Korean P38? Did they use the same threaded adjuster at base of heel?

Hi Chris—I’m not certain and I don’t own a P38, but, based on this image from a P38 eBay listing, it appears that way:
IMG_2614.jpeg

Hopefully someone who owns one and knows can also chime in.